Choose your language

English
en

MOW-S 130 B Rastering – for passive information transmission

for welcoming customers in the entrance hall

6 raster points

wall-floor mouting

integrated cable management

optically customisable

load capacity up to max. 130 kg

can be used for lightweight walls

Made in Germany

The MOW-S 130 B rastering is an extension of the remaining MOW serie. Until now, this serie was only to be obtained by motor for inertial use. If only a passive use is required, for example in entrance halls, the motorized height adjustment loses its meaning. In additon, the rastering version is cheaper.

The display is mounted in one of six rastering points. The rastering runs in steps of 10cm, from 122 – 182 cm. The system is attached to the wall with maximum of 4 screws.

To guarantee you a faultless look, the interagrated system management takes place within the column. The MOW series convinces with its modern, elegant desin and is therefore the perfect display stand to welcome your customers.

The MOW-S 130 B rastering is an extension of the remaining MOW serie. Until now, this serie was only to be obtained by motor for inertial use. If only a passive use is required, for example in entrance halls, the motorized height adjustment loses its meaning. In additon, the rastering version is cheaper.

The display is mounted in one of six rastering points. The rastering runs in steps of 10cm, from 122 – 182 cm. The system is attached to the wall with maximum of 4 screws.

To guarantee you a faultless look, the interagrated system management takes place within the column. The MOW series convinces with its modern, elegant desin and is therefore the perfect display stand to welcome your customers.

Materials

To integrate the MOW-S 130 B rastering well into existing furnishings, such as entrance halls or foyers, the powder coating of the steel housing in accordance with RAL Classic, as well as the front panel can be individually customised to any desing according to the decors listed below.
The HKS standard version consists of the salue in RAL 9016 Traffic White with a front panel in decor Bardolino Oak. Further decors on request.

Colour variations aren’t a reason for reclamation, because the listed decors may differ. The decors are produced by Egger Holzstoffe Brilon GmbH.

You have any questions or suggestions?