Choose your language

English
en

Congress-S

Made in Germany

motorised

installation on ceilings and suspended ceilings possible

formats up to 12 Meter

meets the requirements according to DIN 4102

safety catch and safety limit switch from 5 metres upwards

Version

The Congress-S is an extremely high-quality projection screen that is ideal for professional use in the congress and event sector. It is characterised by its special sizes of up to 12 metres and its technical equipment.

The entire projection screen can be inspected without disassembly (up to W 600 x H 400 cm). Depending on the format of the projection screen, the Congress-S is mounted in a robust sheet steel housing (from W 15 x H 15 cm) or in a zinc-plated housing from a width of 6 metres (from W 30 x H 30 cm).

The Congress-S is available in various formats and designs:

Mounting Method

The Congress-S is designed for ceiling mounting by means of mounting brackets on the outside of the housing. The intelligent assembly technology enables all service and assembly work to be carried out without dismantling the entire projection screen and without any additional inspection opening on site (up to W 600 x H 400 cm).

If ceiling mounting is not possible in your room, wall brackets can be ordered. However, if the existing equipment does not permit direct wall mounting, you can obtain wall spacers. If the projection screen is to be installed flush with the ceiling, ceiling installation sets are available as an option.

Projection Screen Surface

The Congress-S is available in both the Polar TA and Polar GS screens. The Polar TA projection screen surface complies with the requirements according to DIN 4102 – B2 The Polar GS projection screen surface is flame-retardant and meets the requirements according to DIN 4102 – B1.
The matt white projection screen on the front side provides an optimal, lifelike colour display. The screen surface Polar TA has a grey back, the Polar GS a black one. Thus, the screen surfaces are 99.98% light-proof. The dark backside ensures that no back light can pass through.

Accessories

As an option, the screen surface can also be ordered as a rolling screen. This is the ideal solution for installations where pictures hang on walls or windowsills are blocked. With the wall brackets without spacing you can mount the Congress-S on the wall. If the existing equipment does not allow direct wall mounting, we recommend wall spacers with 30 or 40 cm. Special spacers are possible, please contact us!

In our standard version, the motor drive is located on the right-hand side, seen from the front. If your situation so requires, we can also mount the drive for you on the left-hand side. For the Congress-S, you can select a 1-channel radio control with a hand-held transmitter or a key switch to prevent unauthorized operation.

For flush ceiling installation we recommend our professional installation system for suspended ceilings with a pre-assembly frame (up to W 600 x H 400 cm). In order to fill the gap between raw ceiling and suspended ceiling, an optional installation set for suspended ceilings is available. For further accessories our sales team is at your disposal!

Accessories

As an option, the screen surface can also be ordered as a rolling screen. This is the ideal solution for installations where pictures hang on walls or windowsills are blocked. With the wall brackets without spacing you can mount the Congress-S on the wall. If the existing equipment does not allow direct wall mounting, we recommend wall spacers with 30 or 40 cm. Special spacers are possible, please contact us!

In our standard version, the motor drive is located on the right-hand side, seen from the front. If your situation so requires, we can also mount the drive for you on the left-hand side. For the Congress-S, you can select a 1-channel radio control with a hand-held transmitter or a key switch to prevent unauthorized operation.

For flush ceiling installation we recommend our professional installation system for suspended ceilings with a pre-assembly frame (up to W 600 x H 400 cm). In order to fill the gap between raw ceiling and suspended ceiling, an optional installation set for suspended ceilings is available. For further accessories our sales team is at your disposal!

Technical Details

All projection screens over 5 meters are equipped with a safety catch and safety limit switch as standard. The built-in switch meets the requirements of stage technology. This means that all the necessary criteria for tendering and testing of mechanical engineering equipment in production facilities are already fulfilled in our standard version.

With the Congress-S up to W 600 x H 400 cm, a technical revision of the entire technology, including the projection screen, can be carried out in the shortest possible time, without dismantling the housing. If the projection screen is no longer needed, it can be simply rolled up by motorised drive. The Congress-S is equipped with a high-quality, noise-optimized, high-quality electric plug-in drive (230V/50Hz) with thermal protection switch (up to housing size 30 x 30 cm). The loading profile of the Congress-S ensures perfect flatness.

Construction according to DIN 56950-4:2015 Safety requirements and tests on assembled projection screens.

You have any questions or suggestions?

Further Projection Screens